Hi all in Win-RaidForum.
I'm new in this forum and would be happy if anyone could guide me in the right direction.
I would be happy if anyone with good experience was able to assist....:-)
Help needed to make bios bootable from AsusMaximusViFormula_i7477K_M.2 Samsung SSD 970 Evo Plus by using asus hyper M.2 Card V2.
I have recently converted my Boot drive Samsung sata SSD QVO 760 from MBR2GPT with success....;-)
When cloning windows to m.2 it 's not able to finish installation, but just reboot never finish, just start installation all over again.
I'm able to see NVMe M.2 when booting from sata SamsungSSD_QVO from disk manager but not able to boot from it.
I'm only able to use drive as normal data drive, but that is not what i need.
From all threads I've been reading, I still need to modify the bios to make it boot from PCIe M.2
I hereby request some help/guides for modifying my bios to be able to boot from AsusHiperM.2Card in Windows 10 Pro.

Thanks in advance CBangs

Edit by Fernando: Thread title changed, because an identical request already exists >here<.
Unfortunately I am not able to merge them (too many threads within this Sub-Forum).

[HowTo] Get full NVMe support for all Systems with an AMI UEFI BIOS
Then use Asus BFB to flash (M6F.CAP), not EZ or OS environment.
Cloning is not always the best solution compared to the performance of a new fresh OS install...
Good luck.

EDIT: After the mod flashed, the Hyper M.2 will boot with the Samsung NVMe, ONLY one drive will work.

Thanks for quick responds Meatwar
Of cause fresh install preferable.
Do you have good experience with Maximus vi fomula bios mod?
I mean specially the bootable Pcie NVMe M.2 on my setup?

Edit by Fernando: 2 posts merged