Hello.
As you know that dell has patched the plundervolt vulnerability in its computers' bioses & while doing so has rendered majority of them unable to undervolt. For my inspiron 7567, the last bios version with undervolting enabled is 1.11.0. Unfortunately I had already updated long before becoming aware of the situation so now I am stuck with this ridiculus locked bios. I have searched and read here that enabling "CFG Lock" and "Overclocking Lock" will enable undervolting again. So, after spending about a month researching I finally tried modifying my bios. What I did was extracted the bios.bin (v1.15.0) file from my currently working system using intel fpt via command "fptw64.exe -bios -d bios.bin". Now since dell has locked the flash descriptor of my laptop (verified using command "fptw64.exe -d spi.bin") I performed the pinmod (shorting pin 1 and 5 of Realtek HDA chip) which unlocked the FD for me and I was able to read the spi region.

Now for the modding part, I extracted the bios.bin file from dell bios v1.11.0 exe file using "Dell PFS Extract v5.1" (extracted 5 files from the exe one of them was bios with bios guard). I then opened the bios.bin in "Uefitool NE" and searched for the "overclocking lock" using text search, extracted the body of the respecteive PE32 module as .efi after which I used Uefitool v0.28 to replace the corresponding PE32 module in the latest bios.bin v1.15.0 (which I had extracted from my working system) with the extracted .efi module from the old bios.bin v1.11.0. I also verified the resulting modded bios file by extracting the efi module from it and using "IRFExtractor 0.3.6" for easy readability. Finally I flashed the bios using intel fpt via command "fptw64.exe -bios -f modded-bios.bin" which completed successfully (since FD is unlocked now using the pinmod). When I restarted my laptop after flashing the modded bios, the dell logo appeared and after that it gave me bios recovery menu showing only two options which were either recover my bios from HDD or reset bios setting to default. the settings reset option failed many times so I had to recover the bios and now I am stuck as I have no clue what the hell went wrong. I am attaching the bios files both modded and unmodded and also the log of successfull flash using fpt. Please help me with this as the pinmod is quite a tedious task for me to perform again and again.

ATTACHED FILES GDRIVE LINK:
Link:ht,,t,,ps://drive.google.com/drive/folders/
Folder: 1cvpZecfjRyj95UCXDFnn1vPArIXu1-ra?usp=sharing
REMOVE "," FROM HTTPS IN THE ABOVE LINK and paste link and folder content like "LinkFolder" in address bar PLEASE SINCE I AM NOT ALLOWED TO POST EXTERNAL LINKS YET AS I AM A NEW MEMBER


Edit by Fernando: Thread title customized

@Fernando my laptop is not bricked. Sorry if this was not obvious from my post above. My laptop started boot looping after I flashed the modified bios so I had to recover the bios using the recovery image present in my hard drive. My laptop is working fine with latest bios but undervolting is not possible. Kindly the change the topic name to something like "Problem flashing modified bios on Inspiron 7567 even after pinmod (service jumper)"...