[Problem] How to re-enable USB Support in BIOS of a 2in1-Tablet

Win-Raid Forum (Drivers - Firmware - Modding) � BIOS Modding � BIOS Modding Guides and Problems � [Problem] How to re-enable USB Support in BIOS of a 2in1-Tablet

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1 | [Problem] How to re-enable USB Support in BIOS of a 2in1-Tablet datum

Today 4:26 pm (Last edited: 11 minutes ago )

Hello,

I have a big problema with my laptop\tablet, by mistake i disabled usb support.. now i have no way to boot or change some setting in bios (no way to reset, short circuit or cmos reset) ..i can only use windows 10 already previously installed...
I made a backup of the bios with AFUWINGUI, and i tried to enable USB support with the program AMIBCP5 but give me the advice : save secure rom as unsigned. and with AFUWINGUI does not allow me to flashing the bios giving me this error:18- Error: Secure Flash Rom Verify fail .

Someone can help me? there is a possible soltion? my goals are Reset the bios to default settings or enable the usbsupport in my backup rom.
i can send the backup rom if needed
Sorry for my bad english..

Thanks to all.
Matteo T.

Edit by Fernando: Thread title shortened and customized

reply

#2 | RE: Problem with flashing and editing bios in Tablet 2 in 1 Help please datum

13 minutes ago

It would be helpful if users provided, primary, tech specs... dont you think so?
And yes tools around like AMIBCP are useful when used correctly and in the right models, so no surprise what you get as this is not a simple click and done operations
I also like "shorts circuits" specially on other users systems...not mine

Donations via PAYPAL / REVOLUT, if u think the guy deserves it, else to the Win-Raid community on the bottom of the page, as it deserves for all the gathered information.

reply

#3 | RE: Problem with flashing and editing bios in Tablet 2 in 1 Help please datum

2 minutes ago

Zitat von MeatWar im Beitrag #2
It would be helpful if users provided, primary, tech specs... dont you think so?.....

+1

Otherwise these settings are stored in a part f the firmware called NVRAM and normally don't get overwritten when updateing/ flashing bios. Might be that also serial and other machine specific data are stored there. Normally it's not possible to edit single values, so one would have to reset all the settings... If it's possible to flash that back without a programmer depends on the device. As written before post specs and bios backup.

Please keep the relevant informaion within the forum/ thread. I don't answer PMs

reply

[HELP] Dell OptiPlex 9020m Intel ME flash Bricked �

Please enter a reason for warning.