[b][/b]
[i][/i]
[u][/u]
[s][/s]
[code][/code]
[quote][/quote]
[spoiler][/spoiler]
[url][/url]
[img][/img]
[video][/video]
Smileys
smile
smile2
spook
alien
zunge
rose
shy
clown
devil
death
flash
sick
heart
idee
frage
blush
smokin
mad
sad
wink
frown
crazy
grin
hmm
laugh
mund
oh
rolling_eyes
lil
oh2
shocked
cool
[mail][/mail]
[pre][/pre]
Farben
[rot][/rot]
[blau][/blau]
[gruen][/gruen]
[orange][/orange]
[lila][/lila]
[weiss][/weiss]
[schwarz][/schwarz]
mbk1969
Posts: 86 | Last online: 10.11.2017
Name
Maks
Wohnort
Russia, Moscow
Date registered
09.30.2014
Sex
male
    • Zitat von Stilez im Beitrag #15
      @mbk1969 - thanks but I'm actively using them so turning off in the BIOS wouldn't help. But I expect Win 10 will install MS drivers for them which will fix it, if not there's probably updated Win10 drivers from the makers.


      I meant you don`t see them because they are turned off in BIOS. I see you found them by hardware Id.

    • Zitat von Stilez im Beitrag #11
      I would have expected to see ASMedia+Marvell somewhere in Device Manager, but I can't see a specific ASMedia or Marvell storage controller, or AsMedia/Marvell drivers for any disks - in fact I can't see any controllers other than the one Intel chipset controller, and no SATA devices with drivers other than Intel + Microsoft. To save time, do you know where the ASMedia/Marvell controllers and drivers would normally appear, so I can check versions and update them? Or are there Microsoft versions of them which are ok?


      They can be turned off in BIOS.

    • mbk1969 has written a new post "USB devices (mouse and keyboard) run on USB 1.1, why?" 06.29.2017

      Find specialist or/and enthusiast to help you optimize settings in BIOS and in OS

      As for devices attached to USB 3/2 - you attach device to USB port but device dictates what mode to use. Keyboard and mouse do not need big speed

    • mbk1969 has written a new post "USB devices (mouse and keyboard) run on USB 1.1, why?" 06.29.2017

      But you are showing keyboard or mouse - both don`t need USB2 speed.
      Only devices like storage, network benefit from faster speeds.

    • mbk1969 has written a new post "Recommended AHCI/RAID and NVMe Drivers" 06.15.2017

      Zitat von DeathStalker im Beitrag #726
      I don't see a reference to the internal ASMedia ports, oddly (and ALL 10 ports are used)
      All devices from ASMedia have VEN_1B21 in their hardware IDs.

    • mbk1969 has written a new post "Recommended AHCI/RAID and NVMe Drivers" 06.14.2017

      Zitat von Fernando im Beitrag #724
      @mbk1969:
      Which AHCI driver are you currently running on your new AMD Chipset system and which AHCI driver do you recommend to use?


      It is not my rig. Guy runs Win10


      And despite he installed chipset drivers came on CD (with MB) SATA controllers run with MS generic drivers (as well as USB3 controllers). I did advise him to not bother with AMD drivers. It is just strange that I failed to find any info about SATA controllers by HW Ids.

    • mbk1969 has written a new post "Recommended AHCI/RAID and NVMe Drivers" 06.14.2017

      Guys did you ever meet AMD SATA controllers with these HW Ids


      ???

      Motherboard in question is http://www.asrock.com/MB/AMD/Fatal1ty%20...p#Specification

    • mbk1969 has written a new post "Intel Management Engine: Drivers, Firmware & System Tools" 06.02.2017

      Zitat von plutomaniac im Beitrag #3016

      Zitat von mbk1969 im Beitrag #3015
      Motherboard is ASUS P9X79.

      You should install just the driver then which is "Intel MEI Driver v11.0.5.1189 (Windows XP - Windows 10) INF for manual installation".



      And back to my first question - will actual driver give benefits comparing to placeholder one? Do we know whether Windows uses ME?

    • mbk1969 has written a new post "Intel Management Engine: Drivers, Firmware & System Tools" 06.02.2017

      Zitat von plutomaniac im Beitrag #3014
      More info is needed to let you know. What motherboard do you have? I can think of two cases: ME6 Ignition (no ME Interface device) or placeholder MEI driver from Chipset INF Utility.

      Motherboard is ASUS P9X79. Iirc I already flashed ME firmware when rig was on Win7 or Win8. I did not execute chipset INF utility since Win10 has no troubles with identifying all devices but it looks like exactly that - placeholder driver.

      I will check more info when I will be back at home.
      Thank you.

    • mbk1969 has written a new post "Intel Management Engine: Drivers, Firmware & System Tools" 06.02.2017

      I discovered that on my rig with clean install of Win10 AU Intel ME device is present but uses no actual driver. Being minimalist/purist I prefer to have less drivers and less devices. But I am curious whether Windows utilizes Intel ME, and if utilizes then whether should I install actual Intel driver for ME.

      PS I have no troubles with the rig. All is working. It is just curiosity and desire to improve.

    • mbk1969 has written a new post "USB 3.0/3.1 Drivers (original and modded)" 04.20.2017

      Zitat von soloson im Beitrag #969
      About moded Intel USB 3.0/3.1 Drivers v5.0.3.42.
      Can you help me, how to upgrade from moded v5.0.1.38 ?
      I dont want to use DPInst set.
      I would like to upgrade classically via device manager. Drivers only.
      DPInst set is drivers only.
      And Switch drivers goes to "System devices\PCI bus" (or \PCI-X root complex)

    • mbk1969 has written a new post "USB 3.0/3.1 Drivers (original and modded)" 03.10.2017

      Zitat von kkonst im Beitrag #896
      It sure seems to be a driver problem.
      It seems like there (suddenly) isn't enough amperage in USB 3.0 ports. Type-c is capable of more in terms of power, isn't it? That's why it's working, I think.
      Drivers are not responsible for amperage in ports.

    • mbk1969 has written a new post "USB 3.0/3.1 Drivers (original and modded)" 02.15.2017

      denaba you can`t measure performance of keyboard and mouse to compare it on different USB ports.

      I want to elaborate on hidden power plan setting for USB - "USB 3 Link Power Mangement".

      (To unhide it go to elevated Command prompt and execute commands:
      powercfg -attributes 2a737441-1930-4402-8d77-b2bebba308a3 d4e98f31-5ffe-4ce1-be31-1b38b384c009 -ATTRIB_HIDE
      Then go to "Control panel => Power management" and click link "change advanced power settings". In power plan properties dialog expand root node "USB" and look for settings.)

      This setting has four values/steps (at least in Win10) - Off, Minimal power savings, Moderate power savings, Maximum power savings. And by default this setting is set to "Moderate power savings" in both plans - Balanced and High performance. So I would expect a noticeable difference between values "Off" and "Moderate power savings". I urge you to test this thing for yourself. When you select one of the value for this setting and hover mouse cursor over it Windows shows a tip with details on current value.


      Edit: And to another USB setting - USB selective suspend setting. This setting is visible by default. It can be either Enabled or Disabled. I strongly suspect that when it is Enabled then another settings is took into account - Hub Selective Suspend Timeout - which is hidden by default and has default value of 50 ms. (You can unhide it in elevated command prompt: powercfg -attributes 2a737441-1930-4402-8d77-b2bebba308a3 0853a681-27c8-4100-a2fd-82013e970683 -ATTRIB_HIDE)

    • mbk1969 has written a new post "USB 3.0/3.1 Drivers (original and modded)" 02.15.2017

      Zitat von DoubleL im Beitrag #853
      I am new here and hoping for a bit of help. I have a high speed camera that requires USB 3.0 (or 3.1). The basic model is 120 frames/second. When I run the software that controls the camera, it is only writing about 54-56fps to the hard drive. I am certain it is related to this USB throttling that Windows 10 has caused.
      I tried this procedure on one Toshiba i7 laptop (2 years old) and it worked! I was thrilled. Then I tried it on a newer toshiba laptop as well as an Eluktronics gaming laptop (64GB RAM, i7-6700HQ, NVIDIA GTX 1060, etc.) and the camera is still only writing 54-56fps on those machines. The device driver shows slightly different items under the USB controllers but they are all intel.
      Any idea what I might be missing that makes this work on one machine and not the other?
      Try to adjust USB power plan settings. There are two hidden power plan settings for USB - "Hub Selective Suspend Timeout" and "USB 3 Link Power Mangement". To unhide them go to elevated Command prompt and execute commands:

      powercfg -attributes 2a737441-1930-4402-8d77-b2bebba308a3 0853a681-27c8-4100-a2fd-82013e970683 -ATTRIB_HIDE
      powercfg -attributes 2a737441-1930-4402-8d77-b2bebba308a3 d4e98f31-5ffe-4ce1-be31-1b38b384c009 -ATTRIB_HIDE

      Then go to "Control panel => Power management" and click link "change advanced power settings". In power plan properties dialog expand root node "USB" and look for settings.

    • mbk1969 has written a new post "USB 3.0/3.1 Drivers (original and modded)" 01.30.2017

      Zitat von Pete12 im Beitrag #813
      External HDDs ; type Seagate Expansion 2TB and 4TB . They are both USB 3.0 supported and connected to USB 3.1 ( ASmedia )- card ( USB 3.1-card connected on the ASUS-motherboard)
      USB 3.1 are ASmedia-drivers and a USB Roothub with it. USB 3.0 uses the Intel(R) USB 3.0 eXtensible Host Controller-1.0 ( Microsoft)

      If you have seen this all ; do you think it could be better or do you see other improvements ??


      Since both drives are USB3.0 (and not USB3.1) I doubt you will improve their speed beyond 180MB/s.
      If your external USB drives are connected to ASMedia controller ports then installation of Intel drivers will not change performance, as you understand. But if you want to compare performance between ASMedia and Intel controllers then you better install Intel drivers because most of guys here stated increased performance after installation of Intel drivers into Win8+.

Recipient
mbk1969
Subject:


text:
{[userbook_noactive]}


Xobor Forum Software von Xobor